KS Toyota Tacoma Chrome LED Tail Lights incorporate the latest technologies to provide a great taillight replacement with great looks and even greater performance. L.E.D technology allows you to signal faster and brighter for optimum safety, as well as to remain highly visible in dark and inclement conditions.
KS Toyota Tacoma L.E.D. Chrome Tail Lamps are made using superior materials and constructed by precise CAD engineering to assure long life, quality, and performance. These KS Toyota Tacoma Chrome LED Taillamps are also meticulously designed to US DOT Federal Motor Vehicle Safety Standards as well, making them stylish AND street legal.
Also, These KS Toyota Tacoma LED Chrome Tail Lens, like all the other headlights, tail lights and fog lights on our site, come complete with both sides, and should be STREET LEGAL in most communities.
Tools generally needed to install Toyota Tacoma Tail Lights
- Socket wrench set or Phillips screw driver
- Painters tape to prevent scratches to your Toyota Tacoma
- (Rare) Torque wrenches, etc.
Toyota Tacoma Tail Light installation procedure
- Inspect the new set of Toyota Tacoma tail lights to make sure you can complete the installation with the tools you have available.
- Disconnect your Toyota Tacoma battery's negative battery terminal. If your stereo requires a key in order to reboot, please be sure you have it before disconnecting the battery. Also, be aware that you will probably have to reset your clocks, etc. after reconnecting the battery later. Please note that some vehicles (such as newer GMs) have extremely sensitive electrical systems. In these cases failure to disconnect the battery before attempting installation may lead to blown taillamp fuses or other damage.
- Apply painters tape on your Toyota Tacoma around the edges of your Tacoma's taillights to prevent any scratches that might occur while removing and installing taillamps. If uninstalling your Toyota Tacoma rear bumper is required, make sure you have a safe surface to place the Tacoma bumper on and that the working surface below the vehicle is also safe in the event the bumper falls down. This step is particularly important because tail lens, unlike headlights, often require a little force to come loose, leaving many people to inadvertently scratch their Toyota Tacoma in the process.
- Without touching the glass, uninstall the stock brake, signal and reverse bulbs (as applicable). For bulbs with flat rectangle harnesses, you just pull the bulb firmly outward. For bulbs with round bases, you usually just push them in a bit, and then turn a quarter turn to release them. Once the bulb is removed, place them in their original container (if available). If they are cold, you could also store them in a ziplock type of bag. Please note that if your Toyota Tacoma tail lamps have a harness that can be separated via a main harness that leaves part of the harness with the bulbs inside the Tacoma tail lights, you will still need both parts of the harness since the aftermarket Toyota Tacoma tail lights are designed to either re-use the stock bulbs (altezzas) or to connect directly into the bulb harnesses (LED taillights).
- Unscrew the Toyota Tacoma taillamps from the front or use a socket wrench to undo the Tacoma tail lamps from the back. Be aware that the old Toyota Tacoma tail lights might fall immediately once the tension of the bolts is removed. For this reason, it is best to lightly hold the lights in place with your free hand as you unbolt or unscrew them.
- Remove the old Toyota Tacoma taillens and store in a way that the lens will not be scratched. Install the new Toyota Tacoma tail lens and bolt / screw in place.
- Toyota Tacoma LED Tail Lights: Some of your stock bulbs, such as the reverse lights, might be re-used in your new Tacoma LED lights. For the rest, the LED lights will come with male plugs that should be identical to the ends of your stock bulbs. Connect these into your stock harnesses. For plug in type harnesses, please try to install the plugs in the opposite orientation if they do not work.
- Toyota Tacoma LED Tail Lights: Since Toyota LED taillights operate at a lower wattage than your stock bulbs, they include a resistor in order to regulate the current being passed to them. While sometimes this box is internal, more often it is external and connected via a plastic plug. In the case of an external resistor box, it needs to be mounted somewhere (they usually have double sided tape on the backs) where it will be away from heat and moisture.
- Reconnect your Toyota Tacoma battery and turn on your Toyota Tacoma taillamps and check for proper operation and blinking speed. If any functions are not operational, try flipping the plugs the reverse orientation and double checking that the resistor boxes are fully connected.
- Reconnect all connections and tighten all bolts in place.
Are these Toyota Tacoma tail lights sold by piece or as a pair?
All our Toyota taillights are sold in the full pair. When you pay the listed price, you receive the complete set including both the right and the left sides.
Are these Toyota Tacoma tail lights street legal?
As far as we know the Sonar (aka Spyder) and KS (Anzo) brand tail lights on our website are all street legal as mandated by federal law in the United States. This basically means that they are designed to the specifications set forth by the DOT (United States Department of Transportation). Occasionally, DOT might test models for compliance. If any Toyota Tacoma taillights fail (rare) DOT will have the companies issue a recall. For those tail lens, you can return them to us for a refund. For any other brands besides Sonar (aka Spyder) and KS (aka Anzo), we can not guarantee DOT compliance. Also, please be advised that your local laws that may disallow these sorts of taillights to be used.
After I installed Toyota Tacoma LED tail lights my front signals are blinking fast. What do I do?
Your Toyota Tacoma front and rear signals are connected, so when you have a problem with one you will have a problem with the other. A fast blinking signal usually points to too much wattage going through the system. This can be caused by three different situations: 1) a dead bulb in the front or the rear, 2) the appropriate plug on the LED taillamp being plugged in upside down, or 3) the resistor box not being connected or malfunctioning.
Dead bulbs can be examined by eye for blowouts. If one of the wires is broken and/or you see a burnt part of the bulb, then it is probably dead. For the LED plugs, this would only be the case if they were ALWAYS blinking fast. To remedy that situation, just unplug and replug the bulb in the opposite orientation. For a defective resistor box, check the connection. Worst case, try the resistor box from the other side to isolate the problem.
How can I prevent my Toyota Tacoma tail lights from fogging up?
During the first few days of operation, it is normal to see some moisture appear in your Toyota Tacoma tail lens. This is due to the small amounts of moisture in the plastic and coating that are evaporated when the tail lens are first warmed up during use. This sort of moisture is normal and should disappear within a few days.
To be sure that no external moisture gets into the new Toyota Tacoma tail lens though, it is a prudent idea to silicone seal the edges. Clear silicone sealant can be found in any hardware store (and some auto part stores), and can be applied to the seam along the Tacoma taillights where the clear lens meets the rear housing. Also, even if a bulb has died, make sure to keep it installed in the Tacoma tail lamp until you replace it to prevent moisture from entering through the bulb hole.
Can I smoke my Toyota Tacoma tail lights?
While smoking your Toyota Tacoma taillights (tinting them) is certainly possible through the use of carefully applied spray tint (use light even coats), doing so may make them too dark to be legal. Please check your local laws as well as smoked Toyota Tacoma taillights of any darkness might be illegal in your area.
