Aftermarket Chevy Cruze LED Tail Lights, Custom Chevy Cruze LED Rear Ligths
Chevy Cruze LED Taillights are a slick high tech upgrade for old or worn out stock tail lights on your Cruze. L.E.D. taillights are the newest type of tail lights available, and they use super bright and fast acting LED’s to give your Cruze the look of the newer high end vehicles on the road. With a relatively simple installation, you could enjoy the benefits of faster light response time as well as increasing the visibility of your signaling and braking. Best of all, Cruze L.E.D tail lamps give you a clean look similar to the red⁄clear style of taillights, with the same type of aggressive styling found on Altezza tails. Also, due to their bulb-less design, they are more resistant to leaking and fogging up than the other styles of tailllamps available.
At Tunersdepot.com we do our best to source and offer the biggest selection of Chevy Cruze LED Tail Lights, unlike other websites that only carry 1 or 2 styles from the brand that they can make the most money on. In addition to the current selection offered by KS, Sonar (YD), and JY (Junyan aka TM Lighting), we are always adding new brands and the latest releases. Also, instead of just offering the standard Red/Clear Cruze LED Taillights, we try to offer the corresponding Black, Chrome, and other color variations available from the manufacturers.
These Cruze L.E.D. Taillights, like all the other projector headlights, taillights, and foglights on our site, come complete with both sides, and should be street legal in most communities.
Our line of Chevy Cruze LED Tail Lights carry thru 2011, 2012, 2013 or 11, 12, 13 models.
11-13 Cruze LED Taillights
You can also choose in different brands, such as KS LED Taillamps, KS Euro LED Taillight, .
At TunersDepot.com, you can also find many L.E.D. taillights with different color options to choose, there is Clear LED Taillights, Red and Clear LED Tail Light, Black L.E.D. Taillamps, Red LED Tail Lamp, Red⁄Smoke L.E.D. Tails, Black housing LED lights have became more popular in the market because the factory taillight are usually made with chrome housing and you can see immediately see the difference in the appearance after the installation.
Chevy Cruze Taillights FAQ (Frequently Asked Questions)
Are these Chevy Cruze tail lights sold by piece or as a pair?All our Chevy taillights are sold in the full pair. When you pay the listed price, you receive the complete set including both the right and the left sides.
Are these Chevy Cruze tail lights street legal?As far as we know the Sonar (aka Spyder) and KS (Anzo) brand tail lights on our website are all street legal as mandated by federal law in the United States. This basically means that they are designed to the specifications set forth by the DOT (United States Department of Transportation). Occasionally, DOT might test models for compliance. If any Chevy Cruze taillights fail (rare) DOT will have the companies issue a recall. For those tail lens, you can return them to us for a refund. For any other brands besides Sonar (aka Spyder) and KS (aka Anzo), we can not guarantee DOT compliance. Also, please be advised that your local laws that may disallow these sorts of taillights to be used.
After I installed Chevy Cruze LED tail lights my front signals are blinking fast. What do I do?Your Chevy Cruze front and rear signals are connected, so when you have a problem with one you will have a problem with the other. A fast blinking signal usually points to too much wattage going through the system. This can be caused by three different situations: 1) a dead bulb in the front or the rear, 2) the appropriate plug on the LED taillamp being plugged in upside down, or 3) the resistor box not being connected or malfunctioning.
Dead bulbs can be examined by eye for blowouts. If one of the wires is broken and/or you see a burnt part of the bulb, then it is probably dead. For the LED plugs, this would only be the case if they were ALWAYS blinking fast. To remedy that situation, just unplug and replug the bulb in the opposite orientation. For a defective resistor box, check the connection. Worst case, try the resistor box from the other side to isolate the problem.
How can I prevent my Chevy Cruze tail lights from fogging up?During the first few days of operation, it is normal to see some moisture appear in your Chevy Cruze tail lens. This is due to the small amounts of moisture in the plastic and coating that are evaporated when the tail lens are first warmed up during use. This sort of moisture is normal and should disappear within a few days.
To be sure that no external moisture gets into the new Chevy Cruze tail lens though, it is a prudent idea to silicone seal the edges. Clear silicone sealant can be found in any hardware store (and some auto part stores), and can be applied to the seam along the Cruze taillights where the clear lens meets the rear housing. Also, even if a bulb has died, make sure to keep it installed in the Cruze tail lamp until you replace it to prevent moisture from entering through the bulb hole.